A GIS-based zoning of illegal dumping potential for efficient surveillance

To assist in the efficient surveillance against illegal dumping, this study examined and evaluated two methods to illustrate the illegal dumping potential of sites using GIS (Geographic Information System) data. One approach focused on the occurrence of illegal dumping sites; the other on the size of the illegal dumping. Both approaches to zoning were implemented for the Kanto region of Japan, utilizing seven or eight major geographical attributes most closely related to illegal dumping. The zoning results revealed the areas requiring patrols against illegal dumping. Evaluation of the zoning results using the ROC (Receiver Operating Characteristic) curve showed the number of illegal dumping sites detectable under certain surveillance conditions and that the size-based zoning was superior, but this superiority was insignificant for revealing sites with higher potential for large illegal dumping, for which it would be sufficient to use the occurrence-based zoning. The evaluation also showed the contribution of each geographical attribute. Finally, application of the ROC curve to the surveillance planning process was examined, which enables the total social cost of pollution by illegal dumping, rehabilitation of dumping sites, and illegal dumping surveillance to be minimized.     

Electrical and electronic waste management in China: progress and the barriers to overcome.

Serious adverse impacts on the environment and human health from e-waste recycling have occurred in the past and continue to occur in China today, due to a lack of national management strategies. China has made great efforts to face the challenges of the approaching peak increase in the domestic generation of e-waste and the illegal shipment of e-waste from other countries. This study examined recent progress and analysed the main problems associated with this issue in China. It was found that the material and the financial flows of e-waste in China had their own specific characteristics. Nearly 60% of the generated e-wastes were sold to private individual collectors and passed into informal recycling processes. More than 90% of Chinese citizens are reluctant to pay for the recycling of their e-waste. This is due to their traditional understanding that there remained value in these end-of-life products. Regulations concerning e-waste in China have been drafted but their deficiencies are obvious. The extended producer responsibilities (EPR) have been introduced but are not well defined. Eight formal facilities have been planned and are under construction or are in operation along the eastern coast of China but it will be difficult for them to compete with the informal processes for the reasons identified during the study.     

Evaluation of different algal species sensitivity to mercury and metolachlor by PAM-fluorometry.

In this study, the pulse-amplitude-modulation (PAM)-fluorometric method was used to evaluate the difference in the sensitivity to mercury (Hg) and metolachlor of six algal species: Ankistrodesmus falcatus, Selenastrum capricornutum, Chlorella vulgaris, Nannoplankton (PLS), Microcystis aeruginosa and Pediastrum biwae. We found that the fluorescence parameters (phiM, the maximal photosystem II (PSII) quantum yield, phi'M, the operational PSII quantum yield at steady state of electron transport, Q(P), the photochemical quenching value, and Q(N), the non-photochemical quenching value) were appropriate indicators for inhibitory effects of mercury but only phi'M and Q(N) were useful for metolachlor. The examined algal species showed very different levels of sensitivity to the effect of Hg and of metolachlor. The most sensitive species to Hg and metolachlor were respectively M. aeruginosa and A. falcatus, while the least sensitive were C. vulgaris and P. biwae. We interpreted these differences by the action mode of pollutants and by the different metabolism properties and morphological characteristics between algal species. These results related to fluorescence parameters may offer useful tool to be used in bioassay for different pollutants. Heterogeneous algal sensitivity to the same pollutant suggests the need to use a battery of species to evaluate the effects of mixtures of pollutants in aquatic systems.     

A simple method to harness DC (direct current) electrical energy generated by bacterial activity

We developed a new system for collecting electrons generated by bacterial activity to supply DC (direct current) electrical energy. This system used eight titanium sub-electrodes (surface area of each sub-electrode: 189 cm²) connected to one central main titanium electrode (surface area of electrode: 1571 cm²). The distance between each sub-electrode and the main electrode was 30 cm. In an initial experiment, we collected electrons during composting cattle excreta, which was mixed with a commercially available microbial compost activator/starter. We analysed the relationships between the composting temperature and electrical current and voltage. Electrons were effectively collected and used successfully to obtain DC electrical energy. Generation of a stable voltage of approximately 0.5 V was clearly observed. This voltage was not related to compost temperature; however, the generated electrical current increased and decreased with compost temperature. The method was then used in a second experiment to collect electrons generated by bacterial activity in an agricultural field (area: 48 m²). Electrons in the field were effectively collected, and we measured a stable voltage of approximately 1.1 V and a stable current of approximately 0.7 mA. The system has the advantages of being simple, easily maintained, inexpensive, and applicable to large-scale agricultural fields.     

Enhancement of biodegradation of oil adsorbed on fine soils in a bioslurry reactor

Techniques for enhancing the biodegradation of oil-contaminated fine soils in a slurry-phase bioreactor were investigated. Using a model system consisting of kaolin particles containing adsorbed n-dodecane as a diesel fuel surrogate, we investigated how increasing the temperature and adding a surfactant and various hydrophobic support media affected the biodegradation rate of n-dodecane. Increasing the temperature from 25 to 35 degrees C decreased the time required for complete degradation of n-dodecane by 30%, from 110h to 80h. Addition of the surfactant polyethylene glycol p-1,1,3,3-tetramethylbutylphenyl ether decreased the degradation time to less than 48h at 35 degrees C, although a high concentration of the surfactant (3000mgl(-1)) was required. We suspect that the surfactant increased the degradation rate by solubilizing the n-dodecane into the solution phase in which the microorganisms were suspended. We tested five types of organic polymers as support media for the microorganisms and found that the biodegradation time could be reduced by approximately 50% with a support medium made from polyurethane; in the presence of this medium, only 36h was required for complete decomposition at 35 degrees C. The reduction in the degradation time was probably due to transfer of the n-dodecane from the soil to the support medium, which improved contact between the n-dodecane and the microorganisms. The polyurethane support medium bearing the microorganisms was stable and could be reused.     

Accelerated biodegradation of nitrophenols in the rhizosphere of Spirodela polyrrhiza

We investigated the biodegradation of 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2,4-dinitrophenol (2,4-DNP) in the rhizosphere of Spirodela polyrrhiza plants by conducting degradation experiments with three river water samples supplemented with each nitrophenol (NP). We then isolated NP-degrading bacteria both from the S. polyrrhiza roots and from the river water. In the river water samples, removal of the three NP was accelerated in the presence of S. polyrrhiza plants. The three NPs persisted in an autoclaved solution with sterile plants suggests that NP removal was accelerated largely by bacterial NP biodegradation rather than by adsorption and uptake by the plants. We isolated 8 strains of NP-degrading bacteria: 6 strains from the S. polyrrhiza roots and 2 strains from river water without the plants. The 2-NP- and 2,4-DNP-degrading bacteria were isolated only from the S. polyrrhiza roots. The 4-NPdegrading bacteria different from those isolated from the river water samples were also found on S. polyrrhiza roots. The 2-NP- and 4-NP-degrading strains isolated from the roots utilized the corresponding NP (0.5 mmol/L) as the sole carbon and energy source. The 2,4-DNP-degrading strains isolated from the roots showed substantial 2,4-DNP-degrading activity, but the presence of other carbon and energy sources was required for their growth. The isolated NP-degrading bacteria from the roots must have contributed to the accelerated degradation of the three NPs in the rhizosphere of S. polyrrhiza. Our results suggested that rhizoremediation with S. polyrrhiza may be effective for NP-contaminated surface water.     

Calorimetric behaviors of hydroxylamine and its salts caused by Fe(III)

The objective of this study is to obtain information on the calorimetric behaviors of aqueous solutions of hydroxylamine (HA), hydroxylamine chloride (HACl), and hydroxylamine nitrate(HAN) caused by different Fe(III) states (free Fe(III) from Fe(NH₄)(SO₄)₂, Fe(CN)₆³⁻, and Fe(EDTA)⁻). The calorimetric data were obtained with a small-scaled reaction calorimeter, Super-CRC.

In the mixing with Fe(III), HA showed the highest reactivity among three substrates. Free Fe(III) and Fe(EDTA)⁻ showed catalytic effects in the reactions. In the overall heat of reactions, Fe(EDTA)⁻ exceeded free Fe(III), which precipitated as Fe(OH)₃ and decreased the chances of interactions with HA. It was suggested that the generation of NH₃ had taken place in the process of reducing HA along with Fe(II) oxidation. Fe(CN)₆³⁻ was less reactive than free Fe(III) and Fe(EDTA)⁻.

The ability of masking Fe(III) was estimated for CyDTA. The HA including CyDTA had no exothermic peak; however, there was an endothermic peak of the heat flow at Fe(III) injection. CyDTA was found to have the ability to inhibit a violent exothermic reaction of HA.     

Behavior of flames propagating through lycopodium dust clouds in a vertical duct

The structure of flame propagating through lycopodium dust clouds has been investigated experimentally. Upward propagating laminar flames in a vertical duct of 1800 mm height and 150×150 mm square cross-section are observed, and the leading flame front is also visualized using by a high-speed video camera. Although the dust concentration decreases slightly along the height of duct, the leading flame edge propagates upwards at a constant velocity. The maximum upward propagating velocity is 0.50 m/s at a dust concentration of 170 g/m³. Behind the upward propagating flame, some downward propagating flames are also observed. Despite the employment of nearly equal sized particles and its good dispersability and flowability, the reaction zone in lycopodium particles cloud shows the double flame structure in which isolated individual burning particles (0.5–1.0 mm in diameter) and the ball-shaped flames (2–4 mm in diameter; the combustion time of 4–6 ms) surrounding several particles are included. The ball-shaped flame appears as a faint flame in which several luminous spots are distributed, and then it turns into a luminous flame before disappearance. In order to distinguish these ball-shaped flames from others with some exceptions for merged flames, they are defined as independent flames in this study. The flame thickness in a lycopodium dust flame is observed to be 20 mm, about several orders of magnitude higher than that of a premixed gaseous flame. From the microscopic visualization, it was found that the flame front propagating through lycopodium particles is discontinuous and not smooth.     

新型城市环卫和用水基础设施

"生态环卫"技术提供了共同解决两个关键水难题的办法:如何使世界缺乏用水和卫生设备的人数比例下降一半;如何解决湖泊、水库和内海的富营养化.氮和磷超标,主要来源于城市污水和农业肥料的流失.尿液和粪便(特别是尿液)含有氮和磷.一个新的人类废物管理办法,有可能使这些物质在农业领域循环.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.